Camera Support

Gets a digital input state from an Allied Vision camera.

Gets a parameter of type Integer from an Allied Vision camera.

Gets a parameter of type String from an Allied Vision camera.

Captures an image from an Allied Vision camera; returns Nil if no frame comes in the specified time.

Use this filter if the trigger may be not coming for some time, while the application should be performing other operations continuously (e.g. processing HMI events).

Sets a digital output state into an Allied Vision camera.

Sets a parameter of type Integer into an Allied Vision camera.

Sets a parameter of type String into an Allied Vision camera.

Set the driver working mode of LED.

Get input I/O state.

Captures images from a AvSMART device.

Use this filter if the trigger may be not coming for some time, while the application should perform other operations in the main loop continuously, or when the timeout situation must be explicitly detected, or when you want to process images from multiple cameras in a single loop and the cameras are sending images asynchronously.

Set output I/O state.

Initializes and starts image acquisition.

Configures AXIS digital IO.

Captures a frame using AXIS.

Reads AXIS digital port.

Stops acquisition using AXIS.

Executes command in Basler device.

Gets parameter of type Bool.

Gets GigeVision device statistics data.

Gets parameter of type Real.

Gets GigeVision device statistics data.

Captures an image stream from a camera using Pylon library; returns Nil if no frame comes in the specified time.

Sets parameter of type Enumeration.

Sets parameter of type Real.

Sets Basler camera user output.

Stops image acquisition in a camera.

Calibrate data channel to z-map output.

Gets parameter using cxCam Support Package.

Gets parameter using cxCam Support Package.

Captures a frame using cxCam Support Package.

Sets parameter using cxCam Support Package.

Sets parameter using cxCam Support Package.

Sets parameter using cxCam Support Package.

Initializes and starts image acquisition in a camera.

Gets parameter of type Bool.

Gets parameter of type Enum.

Gets parameter of type String.

Captures a frame using Dahua.

Sets parameter of type Double.

Sets parameter of type Integer.

Initializes and starts image acquisition in a camera.

Triggers software trigger.

Get the value of a bool parameter.

Gets the value of a double parameter.

Gets the value of an int parameter.

Gets the value of a string parameter.

Gets the value of a bool parameter.s

Gets the value of a double parameter.

Gets the value of an int parameter.

Gets the value of a string parameter.

Captures Images using Ensenso.

Captures a Point3DGrid using Ensenso.

Captures a Point Map Texture using Ensenso.

Captures a Surface using Ensenso.

Loads global parameters from a file.

Sets a bool parameter.

Sets an int parameter.

Sets a bool parameter.

Sets an int parameter.

Starts capturing data from an Ensenso camera.

Typically used for establishing camera connectivity before the first trigger event. Especially important for multiple-camera systems.

Generates software trigger.

Captures images from a Flir camera.

Use this filter if the trigger may be not coming for some time, while the application should be performing other operations continuously (e.g. processing HMI events).

Starts capturing images from a Flir camera.

Typically used for establishing camera connectivity before the first trigger event. Especially important for multiple-camera systems.

Executes command in GenICam device.

Gets parameter of type Enumeration from Spinnaker device.

Reads line status.

Gets parameter of type String from Spinnaker device.

Captures images from a Flir camera using Spinnaker interface; returns Nil if no frame comes in the specified time.

Sets parameter of type Enum.

Sets parameter of type Real.

Sets user output value.

Stops image acquisition.

Reads current job name.

Captures images from Gocator device.

Captures Measurement data from Gocator device.

Captures Point3DGrid (non resampled surface) from Gocator device.

Captures profile from Gocator device.

Captures Section from Gocator device.

Captures Surface from Gocator device.

Captures uniform profile from Gocator device.

Loads new job.

Stops image acquisition in a Gocator device.

Reads the current job name.

Captures Circle Feature data from GoPxL device.

Captures images from GoPxL device.

Captures Line Feature data from GoPxL device.

Captures Measurement data from GoPxL device.

Captures Plane Feature data from GoPxL device.

Captures Point Feature data from GoPxL device.

Captures Point3DGrid (not resampled surface) from GoPxL device with timeout; returns Nil if no data comes in the specified time.

Captures profile from GoPxL device.

Captures Surface from GoPxL device.

Captures uniform profile from GoPxL device.

Loads a new job.

Stops image acquisition in a GoPxL device.

Sets triggering parameters.

Gets parameter of type Bool.

Gets parameter of type Integer.

Gets parameter of type String.

Captures an image from a Hikvision device.

Sets parameter of type Enum.

Sets parameter of type Real.

Initializes and starts image acquisition in a device.

The function returns information on errors that occurred during an image capture. All errors are listed that occurred since the last reset of the function.

Forces software-controlled captures of an image while a capturing process triggered by hardware is in progress.

Captures an image from an IDS camera.

Sets camera parameters.

Stops image acquisition in a camera.

Captures an image from an ifm device.

Sets the integration time of the device.

Initializes and starts image acquisition in a device.

Generates a software trigger.

Gets an enum parameter of the JAI device.

Gets a float parameter of the JAI device.

Gets a string parameter of the JAI device.

Captures an image using a JAI device with timeout.

Sets an enum parameter of the JAI device.

Sets a float parameter of the JAI device.

Sets a string parameter of the JAI device.

Stops image acquisition in a camera.

Captures a skeleton using Kinect.

Configures pin direction, true for output.

Selects GPO functionality, true for manual toggling using GpioWrite filter (see LucamGpoSelect in Lumenera API for default mode).

Captures a frame using Lumenera.

Sets a parameter.

Stops image acquisition in a Lumenera device.

Returns the state of digital inputs or outputs from matrix vision cameras.

Captures a frame from MATRIX VISION cameras using mvGenTLAcquire SDK.

Generates software trigger.

Captures with timeout a frame using Microview.

Stops acquisition using Microview.

Captures an image from an ICube camera.

Sets a parameter of type auto in an ICube device.

Sets a parameter of type One Push in an ICube device.

Initializes and starts image acquisition in a camera.

Configures SynView digital IO.

Configures one of the internal hardware timers available in the camera.

Generates a software trigger, trigger source should be set to 'software'.

Gets SynView digital IO states.

Gets parameter of type Integer.

Gets parameter of type Real.

Captures a frame using SynView.

Sets parameter of type Bool.

Sets parameter of type Integer.

Sets parameter of type String.

Initializes and starts image acquisition in a SynView camera.

Typically used for establishing camera connectivity before the first trigger event. Especially important for multiple-camera systems.

Captures an image using COE-71 Opto Engineering device.

Initializes and starts image acquisition in a camera.

Gets Genicam parameter of type Bool from internal frame grabber.

Gets Genicam parameter of type Enum from internal frame grabber.

Gets Genicam parameter of type Integer from internal frame grabber.

Captures an image using Opto Engineering device.

Sets serial port internal protocol frame to device.

Sets digital gain.

Sets Genicam parameter of type Enum to internal frame grabber.

Sets Genicam parameter of type Float to internal frame grabber.

Sets Genicam parameter of type String to internal frame grabber.

Stops image acquisition in a camera.

Triggers software trigger.

Captures ColorCameraImage structure using Photoneo.

Captures ConfidenceMap structure using Photoneo.

Captures DepthMap structure using Photoneo.

Captures NormalMap structure using Photoneo.

Captures PointCloud structure using Photoneo.

Captures Texture structure using Photoneo.

Captures TextureRGB structure using Photoneo.

Sets the camera parameters.

Starts capturing data from a Photoneo camera.

Typically used for establishing camera connectivity before the first trigger event. Especially important for multiple-camera systems.

Generates software trigger.

Captures images from a Roseek device.

Sets the driver strength of LED.

Sets the status of programmable LED state indicators supported on the camera.

Stops image acquisition.

Captures an image from a smart camera using AvSMART interface. Allows for remote access to the runtime system.

Captures an image from a smart camera using Roseek interface. Allows for remote access to the runtime system.

Captures an image from a smart camera. Allows for remote access to the runtime system.

Set digital outputs.

Captures a live image using SmartRay.

Captures a PIL images using SmartRay.

Captures a point cloud with timeout using SmartRay.

Loads parameter set from file to SmartRay device.

Loads SmartXtract preset data from file to SmartRay device.

SmartRay median filter.

SmartRay smooth filter dedicated to 3D vision .

Stops acquisition using SmartRay.

Gets a parameter of type Bool.

Gets a parameter of type Enum.

Gets a parameter of type String.

Captures a frame using an Omron device.

Sets a parameter of type Double.

Sets a parameter of type Integer.

Initializes and starts image acquisition in device.

Controls camera external trigger.

Captures a frame from The Imaging Source cameras using ICImagingControl.

Sets digital IO line state.

Stops image acquisition in a camera.

Sets triggering parameters.

Gets parameter of type Enum.

Gets parameter of type Real.

Captures an image from a Thorlabs device.

Sets parameter of type Bool.

Sets parameter of type Integer.

Sets parameter of type String.

Stops image acquisition in a device.

Generates software trigger for XIMEA device.

Gets parameter of type Float from XIMEA device.

Captures an image from a XIMEA camera.

Defines selected GPI (digital input) functionality.

Sets parameter of type Float in XIMEA device.

Initializes and starts image acquisition in a camera.

Generates software trigger.

Captures an image using X-Sight smart camera.

Sets digital output.

Sets PWM light.

Sets strobe active.

Sets strobe invert.

Stops image acquisition.

Generates a software trigger.

Gets an enum parameter of the ZebraCVCameras device.

Gets a float parameter of the ZebraCVCameras device.

Gets a string parameter of the ZebraCVCameras device.

Captures an image using a ZebraCVCameras device with timeout.

Sets an enum parameter of the ZebraCVCameras device.

Sets a float parameter of the ZebraCVCameras device.

Sets a string parameter of the ZebraCVCameras device.

Stops image acquisition in a camera.

Turns device aim on or off.

Generates a software trigger.

Captures a frame using a Zebra scanner.

Lists available Zebra scanners.

Scans a barcode using a Zebra scanner.

Initializes and starts image acquisition in a scanner.

Switch host mode of a specified scanner.