You are here: Start » Filter Reference » Camera Support » IDS » IDS_CaptureStatus

IDS_CaptureStatus

Basic

The function returns information on errors that occurred during an image capture. All errors are listed that occurred since the last reset of the function.

	Name	Type	Description
	inDeviceID	String*	Device serial number or user definable camera ID
	inReset	Bool	Resets the CaptureStatus information
	outNumberOfErrors	Integer	Total number of errors
	outNoDestMem	Integer	There is no destination memory for copying the finished image.
	outConversionFailed	Integer	The current image could not be processed correctly.
	outImageLocked	Integer	The destination buffers are locked and could not be written to.
	outOutOfBuffers	Integer	No free internal image memory is available to the driver. The image was discarded.
	outDeviceNotReady	Integer	The camera is no longer available. It is not possible to access images that have already been transferred.
	outUsbTransferFailed	Integer	The image was not transferred over the USB bus.
	outDevTimeout	Integer	The maximum allowable time for image capturing in the camera was exceeded.
	outEthBufferOverrun	Integer	The sensor transfers more data than the internal camera memory of the GigE uEye camera can accommodate.
	outEthDevMissedImages	Integer	Freerun mode: The camera could neither process nor output an image captured by the sensor. Hardware trigger mode : The camera received a hardware trigger signal which could not be processed because the sensor was still busy.
	outFrameCaptureFailed	Integer	USB 3 uEye CP Rev. 2 with activated image memory only: The image was not transferred.

Parallel execution

Complexity Level

Disabled in Lite Edition