Back to Adaptive Vision Studio website

You are here: Start » Filter Reference » Camera Support » Allied Vision Technologies » Vimba_StartAcquisition


Module: ThirdParty

Starts capturing images from an Allied Vision camera.


Typically used for establishing camera connectivity before the first trigger event. Especially important for multiple-camera systems.
Name Type Description
inDeviceID String* Device identifying address
inImageFormat VimbaImageFormatParams Image format parameters
inAcquisitionControl VimbaAcquisitionControlParams Acquisition control parameters


Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Vimba SDK software.

Vimba SDK can be downloaded from the following website:

To verify the driver installation, you can run Vimba Viewer. If the camera was detected and you can see the view from the camera, you can use Vimba SDK in Adaptive Vision Studio.

Recommended Vimba SDK version for Adaptive Vision Studio usage is 2.1.

Camera identification

When there is only one Allied Vision camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.

inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.

Multithreaded environment

This function is not guaranteed to be thread-safe. When used in multithreaded environment, it has to be manually synchronized.

Complexity Level

This filter is available on Advanced Complexity Level.