Back to Aurora Vision Studio website

You are here: Start » Filter Reference » Camera Support » cxCam » cxCam_GrabData_WithTimeout

cxCam_GrabData_WithTimeout

Basic

Module: ThirdParty

Captures a frame using cxCam Support Package with timeout.

Name Type Range Description
Input value inDeviceID String* Device URI.
Input value inInputQueueSize Integer 3 - 200 Capacity of output frames queue
Input value inTimeout Integer 1 - Maximum time to wait for frame in milliseconds.
Input value inModeAndAlgorithm CxCamModeAndAlgorithmConfiguration* 3D algorithm configuration.
Input value inC6ComponentSelector CxCamC6ComponentSelector* Component selector for C6 family.
Input value inPixel CxCamImagePixel Output pixel type.
Input value inScannerMode CxCamScannerMode Scanner mode.
Input value inAcquisitionMode CxCamAcquisitionMode AcquisitionMode.
Input value inTriggerMode CxCamTriggerMode* Trigger mode.
Input value inSequencerMode CxCamTriggerSequencerMode* Trigger sequencer mode.
Input value inC6TriggerSetup CxCamC6TriggerSetupArray Trigger setup for C6 family.
Output value outAOI CxCamAOIOutputArray? Output data. Usually one item.

Remarks

Camera driver software

This filter is intended to cooperate with a camera using its vendor SDK. To be able to connect to a camera, it is required to install AT SolutionPackage Software (previously known as cxCam Support Package) with camera dedicated drivers.

Package can be downloaded from the following website: https://www.at-sensors.com/product-support/downloads/ (registration may be required).

It may also be required to install GigE Vision Transport Layer as described here.

Add DLL path to system environment variable may be required. The SDK is divided into several directories with shared libraries - you have to add them all.

You should install the transport layer from Common Vision Box Runtime. The lack of this component may cause the application to behave unexpectedly.

Installing special network transport transport layer from vendor may be required.

Recommended AT SolutionPackage Software version for Aurora Vision Studio usage is 2023.12.

32-bit platform is not supported.

Camera identification

When there is only one camera connected to a computer, field inDeviceID can be set to Auto. In this case, first available camera will be found and connected.

inDeviceID field can be used to pick one of multiple cameras connected to computer. DeviceID can be set to:

  • URI - should be specified on device casing.
Camera parameters

Setting inInputQueueSize parameter to 'Auto' will select four value as input queue size.

All the other parameters exposed by camera filters are optional, setting them to 'Auto' leaves related parameter unchanged in camera (device default or user set configuration).

To change other, more advanced camera parameters, use specific filters.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.

Filter Group

This filter is member of cxCam_GrabData filter group.

See Also