Back to Aurora Vision Studio website

You are here: Start » Filter Reference » Hardware Support » Hilscher » Hilscher_Channel_IORead_SInt8


Module: ThirdParty

Receives generic packet that can be filled with any data through Hilscher device.

Name Type Range Description
Input value
inBoardName String*
Input value
inChannelNumber Integer 0 - 10
Input value
inOffset Integer 0 - 10000
Output value
outData Integer



For profinet: Firmware (recommended 3.13 series)

Firmware needs to be uploaded to the card prior to opening any type of channel.
In case of failing to update the firmware, try to restart your computer.

IO Offset (inOffset)
Offset as displayed in Hilscher software
Data direction
Slot direction is from the application perspective, different than in SYCON software.
IN: in is marked as output
OUT: in is marked as input
Data endianness
Remember to check endianness on controller and device sides, most controllers will use big endian. Data written to the card will be converted by default to network order. (to big endian)
Data read from the card will be converted to native byte order. (by default from big endian)

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.

Filter Group

This filter is member of Hilscher_Channel_IORead filter group.