Back to Aurora Vision Studio website

You are here: Start » Filter Reference » Camera Support » Ensenso » Ensenso_SetGlobalParameter_Int

Ensenso_SetGlobalParameter_Int


Module: ThirdParty

Sets an int parameter.

Name Type Description
Input value inDevices EnsensoCameraInformationArray Structures identifying devices.
Input value inPath String Configuration path, relative.
Input value inValue Integer

Examples

Configuration tree
Configuration paths are relative to root or camera tree.

for example path Sensor/Temperature in GetGlobalParamerter filter will give read only access to currently opened camera sensor temperature (double)

path Parameters/Capture/PixelClock in GetParamerter filter will give access to camera pixel clock

Remarks

Camera identification

When there is only one Ensenso camera connected, the field inDevices can be set to Auto. In this situation, the first available camera will be used.

inDevices can be used to pick one or many of multiple cameras connected to the computer.

Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Ensenso SDK software, and uEye driver (same as in IDS camera filters)

Ensenso SDK and uEye driver can be downloaded from the following website: https://www.optonic.com/en/support/download/ensenso-sdk/

Recommended Ensenso SDK version for Aurora Vision Studio usage is 3.5.1419 and uEye driver 4.96.1.

Parallel execution

This filter cannot be placed in multiple Workers.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.

Filter Group

This filter is member of Ensenso_SetGlobalParameter filter group.