You are here: Start » AVL.NET » Function Reference » Computer Vision » Shape Fitting 3D » AVL.FitPathToRidges3D_Direct

AVL.FitPathToRidges3D_Direct

Performs a series of 1D ridge detections in 3D and creates a path from the detected points.

Namespace:AvlNet
Assembly:AVL.NET.dll

Syntax

C++
C#
 
public static void FitPathToRidges3D_Direct
(
	AvlNet.Surface inSurface,
	AvlNet.PathFittingField inFittingField,
	AvlNet.CoordinateSystem2D? inFittingFieldAlignment,
	float? inScanStep,
	float? inSamplingStep,
	int inScanWidth,
	AvlNet.InterpolationMethod inSurfaceInterpolation,
	AvlNet.RidgeScanParams3D inRidgeScanParams,
	AvlNet.Selection inRidgeSelection,
	AvlNet.LocalBlindness? inLocalBlindness,
	int? inMaxProfileGapWidth,
	int? inMaxPathInterpolationLength,
	float? inMaxDeviationDelta,
	float inMaxIncompleteness,
	INullable<List<AvlNet.Point3D>> outPath
)

Parameters

Name Type Range Default Description
inSurfaceAvlNet.SurfaceSurface to fit the path to.
inFittingFieldAvlNet.PathFittingFieldPath fitting field.
inFittingFieldAlignmentAvlNet.CoordinateSystem2D?Adjusts the fitting field to the position of the inspected object. Default value: atl::NIL.
inScanStepfloat?<0.0f, INF>5.0fOptional implicit conversion of the input path to an equidistant one. Default value: 5.0f.
inSamplingStepfloat?<0.0f, INF>Desired distance between consecutive sampling points on the scan segments; if Nil, the bigger of surface X and Y scales is chosen. Default value: atl::NIL.
inScanWidthint<1, INF>5The width of each scan field (in pixels). Default value: 5.
inSurfaceInterpolationAvlNet.InterpolationMethodBilinearInterpolation method used for extraction of surface points. Default value: Bilinear.
inRidgeScanParamsAvlNet.RidgeScanParams3DRidgeScanParams3D ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 0.6f RidgeWidth: 5.0f RidgeMargin: 2.0f RidgeOperator: Minimum MinMagnitude: 5.0f RidgePolarity: Low )Parameters controlling the ridge extraction process. Default value: RidgeScanParams3D ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 0.6f RidgeWidth: 5.0f RidgeMargin: 2.0f RidgeOperator: Minimum MinMagnitude: 5.0f RidgePolarity: Low ).
inRidgeSelectionAvlNet.SelectionSelection mode of ridges.
inLocalBlindnessAvlNet.LocalBlindness?Defines conditions in which weaker ridges can be detected in the vicinity of stronger ridges. Default value: atl::NIL.
inMaxProfileGapWidthint?<0, INF>1Maximal number of consecutive not existing profile points. Default value: 1.
inMaxPathInterpolationLengthint?<0, INF>1Maximal number of consecutive points not found. Default value: 1.
inMaxDeviationDeltafloat?<0.0f, INF>Maximal difference between deviations of consecutive path points. Default value: atl::NIL.
inMaxIncompletenessfloat<0.0f, 0.999f>0.1fMaximal fraction of ridge points not found. Default value: 0.1f.
outPathAvlNet.INullable<System.Collections.Generic.List<AvlNet.Point3D>>Fitted path or nothing if the fitting failed. This parameter cannot be null.

Hardware Acceleration

This operation supports automatic parallelization for multicore and multiprocessor systems.

Hardware acceleration settings may be manipulated with Settings class.

Errors

List of possible exceptions:

Error type Description
DomainError Ridge operator parameters are too low in surface ridges detector in FitPathToRidges3D.
DomainError Sampling step set to zero in FitPathToRidges3D.

Function Overrides

See also