Back to Aurora Vision Library website

You are here: Start » Function Reference » Hardware Support » Z4Sight » Z4Sight_SetOutputLevel

Z4Sight_SetOutputLevel


Header: ThirdPartySdk.h
Namespace: avl
Module: ThirdParty

Sets output signal level.

Syntax

void avl::Z4Sight_SetOutputLevel
(
	Z4Sight_State& ioState,
	atl::Optional<const avl::Z4SightSystemAndDeviceIdentifier&> inDeviceID,
	int inOutput,
	bool inLevel,
	bool inForceUserOutputSource
)

Parameters

Name Type Range Default Description
Input will be modified ioState Z4Sight_State& Object used to maintain state of the function.
Input value inDeviceID Optional<const Z4SightSystemAndDeviceIdentifier&> NIL Device identification.
Input value inOutput int 0 - 63 Output signal.
Input value inLevel bool Logic level of the output signal.
Input value inForceUserOutputSource bool Whether to set the output source to user bit or not.

Remarks

I/O device driver software

This filter is intended to cooperate with a Zebra 4Sight device using its vendor SDK. To be able to connect to the device, it is required to install Matrox MIL X SDK. Zebra 4Sight industrial PCs usually come with a preinstalled runtime license.

Add DLL path to system environment variable may be required.

Recommended Matrox MIL X SDK version for Aurora Vision Studio usage is V22H1 (10.60.0776).

Device identification

Device field can be used to specify the number (rank) of the target board of the specified system type. Device can be set to:

  • DEFAULT - Specifies the default board. The default board is set in the MILConfig utility.
  • DEVn - Specifies the device number (rank) of the board (where 0 <= n <=15).

System field can be used to specify the system type. System can be set to:

  • HOST - Specifies the default build-in system like IO in industrial PC.
  • CONCORD - Specifies the IO system from Concord framegrabber.

This filter allows to set the logical level of a specific output port of the device.

Setting the output source

The source of the specific output port must be set to User using Z4Sight_SetOutputSource filter first for this filter to take effect. It is also possible to force an automatic change of the output source by setting the inForceUserOutputSource field value to true.

See Also