You are here: Start » Filter Reference » Profile
Profile
Profile Basics |
||||
| Icon | Name | Description / Applications | Modules | |
|---|---|---|---|---|
 |
CreateUniformProfile | 
|
Creates a profile with all its elements set to the same value. |
FoundationPro |
|
GetProfileElement |
|
Gets a single value from a profile, located at the specified index. |
FoundationPro |
|
GetProfileElement_Interpolated |
|
Gets a single value from a profile, interpolated at any point. |
FoundationPro |
|
GetProfileValue |
|
Gets a single value from a profile, located at the specified X (real-world) coordinate. |
FoundationPro |
|
ProfileCoordinates |
|
Returns an array of all X and Y coordinates of the input profile. |
FoundationPro |
|
ProfileIndices |
|
Returns an array of all indices of the input profile (0, 1, 2, ...). |
FoundationPro |
|
SetProfileElement |
|
Sets a single element in a profile, located at the specified index. |
FoundationPro |
|
SetProfileXTransform |
|
Sets the offset and the scale of a profile in the X axis. Makes it possible to use real-world X coordinates in a profile. |
FoundationPro |
 |
SkipEmptyProfile |
|
If the input profile contains at least one element, then it is copied to the output; otherwise Nil is returned. Secures against domain errors caused by empty profiles, e.g. just before the ProfileAverage filter is to be invoked. |
FoundationPro |
Profile Combinators |
||||
| Icon | Name | Description / Applications | Modules | |
|
AccumulateProfile |
|
Creates a profile in a loop by concatenating individual values. |
FoundationPro |
|
AddProfiles |
|
Adds two profiles value by value. |
FoundationPro |
|
AddProfiles_OfArray |
|
Adds profiles of an array value by value. |
FoundationPro |
|
AddProfiles_OfLoop |
|
Adds profiles appearing in consecutive iterations value by value. |
FoundationPro |
|
DifferenceProfile |
|
Computes profile representing difference between corresponding values of given profiles. |
FoundationPro |
|
DivideProfiles |
|
Divides two profiles value by value. |
FoundationPro |
|
JoinProfiles |
|
Concatenates two profiles into one. |
FoundationPro |
|
MaximumProfile |
|
Computes the maximum of two profiles point by point. |
FoundationPro |
|
MaximumProfile_OfArray |
|
Computes the maximum of profiles of an array. |
FoundationPro |
|
MaximumProfile_OfLoop |
|
Computes the maximum of profiles appearing in consecutive iterations. |
FoundationPro |
|
MinimumProfile |
|
Computes the minimum of two profiles point by point. |
FoundationPro |
|
MinimumProfile_OfArray |
|
Computes the minimum of profiles of an array. |
FoundationPro |
|
MinimumProfile_OfLoop |
|
Computes the minimum of profiles appearing in consecutive iterations. |
FoundationPro |
|
MultiplyProfiles |
|
Multiplies two profiles value by value. |
FoundationPro |
|
MultiplyProfiles_OfArray |
|
Multiplies profiles of an array value by value. |
FoundationPro |
|
MultiplyProfiles_OfLoop |
|
Multiplies profiles appearing in consecutive iterations value by value. |
FoundationPro |
|
SubtractProfiles |
|
Subtracts two profiles value by value. |
FoundationPro |
Profile Features |
||||
| Icon | Name | Description / Applications | Modules | |
|
ProfileAverage |
|
Computes the average value of a profile. |
FoundationPro |
|
ProfileEdges | 
|
Finds the locations at which the profile values raise or fall quickly. Can be used for 1D edge detection when the brightness profile is extracted from an image in a non-standard way. |
FoundationPro |
|
ProfileLocalExtrema |
|
Finds the locations at which the values of the input profile are locally highest or lowest. |
FoundationPro |
|
ProfileMaximum |
|
Finds the highest value of the input profile, its precise location and the corresponding index. |
FoundationPro |
|
ProfileMinimum |
|
Finds the lowest value of the input profile, its precise location and the corresponding index. |
FoundationPro |
|
ProfileRidges |
|
Finds the high or low peaks in the input profile. Can be used for 1D ridge detection when the brightness profile is extracted from an image in a non-standard way. |
FoundationPro |
|
ProfileSections |
|
Finds subprofiles whose values fall into the specified range. It may also be considered profile thresholding. |
FoundationPro |
|
ProfileSize |
|
Returns the number of elements in a profile. |
FoundationPro |
|
ProfileStripes |
|
Finds pairs of opposite (raising and falling) edges in the input profile. Can be used for 1D stripe detection when the brightness profile is extracted from an image in a non-standard way. |
FoundationPro |
|
ProfileSum |
|
Computes the sum of profile values. |
FoundationPro |
|
ProfileZeroCrossings |
|
Finds the points of a profile at which the profile intersects the x-axis. |
FoundationPro |
Profile Local Transforms |
||||
| Icon | Name | Description / Applications | Modules | |
|
ConvolveProfile |
|
Applies a user-defined convolution to a profile. |
FoundationPro |
|
DifferentiateProfile |
|
Computes the derivative of a profile. |
FoundationPro |
|
DifferentiateProfile_Step |
|
Computes the derivative of a profile with a given difference step. |
FoundationPro |
|
DilateProfile |
|
Changes a profile by choosing maximum point within a kernel. |
FoundationPro |
|
ErodeProfile |
|
Changes a profile by choosing minimum point within a kernel. |
FoundationPro |
|
SmoothProfile_Gauss |
|
Smooths a profile by averaging points within a kernel using gaussian-weighted average. Noise removal. |
FoundationPro |
|
SmoothProfile_Gauss_Mask | 
|
Smooths a profile by averaging points with one of ten pre-computed Gauss kernels. Noise removal. Faster, but less accurate. |
FoundationPro |
|
SmoothProfile_Mean |
|
Smooths a profile by averaging points within a kernel. |
FoundationPro |
Profile Metrics |
||||
| Icon | Name | Description / Applications | Modules | |
|
ProfileAutocorrelation |
|
Computes the correlation between neighboring sub-profiles of different sizes and infers the most probable period length. |
FoundationPro |
|
ProfileCorrelation |
|
Computes the correlation between two sub-profiles. |
FoundationPro |
|
ProfileDistance |
|
Computes the [mean] square error between two profiles. |
FoundationPro |
Profile Point Transforms |
||||
| Icon | Name | Description / Applications | Modules | |
|
AbsoluteProfile |
|
Transforms each profile value to its absolute value. |
FoundationPro |
|
AddToProfile |
|
Adds a scalar value to each element of a profile. |
FoundationPro |
|
ClipProfileValues |
|
Applies limits to profile values. |
FoundationPro |
|
DivideProfile |
|
Divides each element of a profile by a scalar value. |
FoundationPro |
|
MultiplyProfile |
|
Multiplies each element of a profile by a scalar value. |
FoundationPro |
|
NegateProfile |
|
Transforms each profile value to its negation. |
FoundationPro |
|
NormalizeProfile |
|
Rescales a profile linearly, so that its minimum becomes inNewMinimum and its maximum becomes inNewMaximum. |
FoundationPro |
|
RescaleProfile |
|
Applies a linear transformation to a profile. |
FoundationPro |
|
SubtractFromProfile |
|
Subtracts a scalar value from each element of a profile. |
FoundationPro |
Profile Relations |
||||
| Icon | Name | Description / Applications | Modules | |
 |
TestProfileDominatesProfile |
|
Checks whether values in the first profile are greater or equal than corresponding values in the second profile. |
FoundationPro |
|
TestProfileEqualTo |
|
Checks whether profiles are exactly equals. |
FoundationPro |
Profile Spatial Transforms |
||||
| Icon | Name | Description / Applications | Modules | |
|
CropProfile |
|
Confines a profile to its continuous subsequence. |
FoundationPro |
|
ResizeProfile |
|
Changes the size of a profile, preserving its shape. |
FoundationPro |
|
RotateProfile |
|
Moves the last element ahead of the first one (inShift times). |
FoundationPro |
|
ShrinkProfileNTimes |
|
Reduces the length of a profile N-times by averaging each N consecutive elements. |
FoundationPro |
|
UncropProfile |
|
Extends the profile by adding zeros at the beginning and at the end. Undoes CropProfile. |
FoundationPro |
