Back to Aurora Vision Studio website
You are here: Start » Filter Reference » Hardware Support » Advantech
Advantech
Select a filter from the list below.
| Icon | Name | Description / Applications | Modules | |
|---|---|---|---|---|
 |
AdamTCP_Connect | 
|
Connects as a client to a remote Advantech Adam device. |
ThirdParty |
 |
AdamTCP_Function01 |
|
Function code 01. Reads discrete output's ON/OFF status. |
ThirdParty |
|
AdamTCP_Function02 |
|
Function code 02. Reads discrete input's ON/OFF status. |
ThirdParty |
|
AdamTCP_Function03 |
|
Function code 03. Reads the binary contents of input registers. |
ThirdParty |
|
AdamTCP_Function04 |
|
Function code 04. Reads the binary contents of input registers. |
ThirdParty |
 |
AdamTCP_Function05 |
|
Function code 05. Forces a single coil to either ON or OFF. |
ThirdParty |
|
DAQNavi_GetDigitalInput |
|
Returns value from digital input. |
ThirdParty |
|
DAQNavi_GetDigitalInputs |
|
Returns values from all digital inputs. |
ThirdParty |
|
DAQNavi_GetDigitalInterrupt |
|
Returns interrupt values. |
ThirdParty |
|
DAQNavi_GetDigitalOutput |
|
Gets digital output value. |
ThirdParty |
|
DAQNavi_GetDigitalOutputBit |
|
Gets digital output bit value. |
ThirdParty |
|
DAQNavi_InitInterrupts |
|
Initializes interrupts. |
ThirdParty |
|
DAQNavi_SetDigitalOutput |
|
Sets digital output value. |
ThirdParty |
|
DAQNavi_SetDigitalOutputBit |
|
Sets digital output bit to specified value. |
ThirdParty |
|
DAQNavi_SetPortDirection |
|
Sets the port direction (input or output). |
ThirdParty |
