You are here: Start » Filter Reference » Hardware Support » National Instruments » DAQmx_CreatePulseChannelFreq

DAQmx_CreatePulseChannelFreq

Module:	ThirdParty

Creates a task and channel to generate pulse.

Name	Type	Description
inDeviceID	String *	Device alias, product name or a serial number
inCounter	String *	Name of a counter used to create virtual channel
inIdleState	DAQmxIdleState	Resting state of an output terminal
inInitDelay	Real	Time (in seconds) to wait before generating pulse
inFrequency	Real	Frequency of generated pulse
inDutyCycle	Real	The width of the pulse divided by the pulse period
outTaskID	DAQmxTaskID	ID of a created task

Remarks

Device driver software

This filter is intended to cooperate with digital I/O cards using its vendor driver software. To be able to connect to a card it is required to install NI-DAQmx driver software. Currently Aurora Vision Studio requires NI-DAQmx version 23.3.

NI-DAQmx driver software can be downloaded from the following website: https://www.ni.com/pl-pl/support/downloads/drivers/download.ni-daq-mx.html#480879.

Device identification

When there is only one device connected to computer, inDeviceID field can be set to Auto. In this situation first available device will be found and connected.

inDeviceID can be used to pick one of multiple devices connected to computer. Set this field to Device alias (for example "Dev1"), product name or serial number. This parameters should be available in Measurement & Automation Explorer.

User manual

For more informations about using this filters please follow the link: Working with National Instruments devices.

Parallel execution

This filter cannot be placed in multiple Workers.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.