Back to Aurora Vision Studio website

You are here: Start » Filter Reference » Camera Support » Allied Vision Technologies » Vimba_GetRealParameter

Vimba_GetRealParameter


Module: ThirdParty

Gets a parameter of type Real from an Allied Vision camera.

Name Type Description
Input value inDeviceID String* Device identifying address
Input value inParameterName String Name of feature parameter
Output value outValue Real Value retrieved from device parameter

Remarks

Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Vimba SDK software.

Vimba SDK can be downloaded from the following website: https://www.alliedvision.com/en/products/software.html

To verify the driver installation, you can run Vimba Viewer. If the camera was detected and you can see the view from the camera, you can use Vimba SDK in Aurora Vision Studio.

Recommended Vimba SDK version for Aurora Vision Studio usage is 6.0.

Camera identification

When there is only one Allied Vision camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.

inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.

Filter Group

This filter is member of Vimba_GetParameter filter group.