| Name | Description |
|---|
 | AccumulationMode |
Possible combinations of values in profile extraction operations.
|
| ActivationFunction |
Function used to activate neuron.
|
| AdjustmentMetric |
Optimization metric for path adjustment
|
| Anchor1D |
Decides about relative position of object. Exact behaviour depends on filter
being used.
|
| Anchor2D |
Decides about relative position of object. Exact behaviour depends on filter
being used.
|
| AndroidCameraOption |
Barcode data types.
|
| AndroidSystemDirectory |
Barcode data types.
|
| AngleDifferenceTolerance |
Specifies what angles can be considered similar.
|
| AngleMetric |
Methods of angle measurement.
|
| AngleRange | |
| AnyCameraModelType | |
| AnyCodeInverse |
Inverse code settings. If DPM enabled then always Both version is used.
|
| AnyCodeMirrorImages |
Decode mirror images.
|
| Axis |
Selects axis on which operation will be performed.
|
| BarcodeFormat |
Recognizable formats of barcodes.
|
| BarcodeGradingError |
Code grading error details.
|
| BarcodeLimitedMarginCheck |
Limited margin check.
|
| BarcodeReadingStrategy |
Determines if additional attempts to read a barcode should be performed.
|
| BarcodeSecurityLevel |
Increasing the level of security can reduce scanning aggressiveness, so select
only the level of security necessary.
|
| BarcodeStartStopCharacters |
Detect upper case or lower case barcode start/stop characters.
|
| BayerType |
Describes kind of Bayer-encoding.
|
| BilateralSamplingMethod |
Determines which sampling method will be used in the calculations.
|
| BinaryMode | |
| BlobMergingMethod |
Changes classification method in gray based image segmentation.
|
| BlobsDifferenceMeasure |
Changes classification method in gray based image segmentation.
|
| BlobThresholdReferenceMethod |
Possible methods of calculating the center of a data mode.
|
| BorderPosition |
Determines where exactly the border is built.
|
| BoundingRectangleFeature |
Criterion of finding bounding rectangle.
|
| CameraModelType |
Types of available camera model
|
| CharacterFeaturesType | |
| CharacterSortingOrder |
Decides whether and how to sort character regions in optical character recognition
related filters.
|
| CircleFittingMethod |
Possible methods of fitting a circle to a set of points.
|
| CircularityMeasure |
When calculating circularity one may choose to use different reference circular
region.
|
| CodabarStripMode |
Codabar read result strip mode
|
| CodeDecodeStrategy |
Decode strategy.
|
| CodeDetectionMethod |
Detection method.
|
| CodeFormat |
Recognizable code formats.
|
| CodeInverse1D |
Code inverse.
|
| CodePolarity |
Determines which pixel values will be interpreted as foreground modules.
|
| ColorPalette |
Describes which color palette will be used by the ColorizeImage filter.
|
| CompareMeasure |
Ways of computing image compare.
|
| CornerResponseMethod |
Corner response is calculated with regard to convolution matrix, given as \[M
= \left(\begin{array}{ccc} \sum g_r^2 & \sum g_c g_r \\ \sum g_c g_r &
\sum g_c^2 \end{array} \right)\]
|
| CorrelationMeasure |
Ways of computing image correlation.
|
| CreateSpatialMapUnit |
Types of units/coordinates for parameters of SpatialMap creation filter
|
| CropScaleMode |
Chooses scale for the output image.
|
| CrosshairShape |
Shape of drawn crosshairs representing points.
|
| CurvatureMeasure |
Method of computation of the surface curvature.
|
| CylinderMappingMode |
Determines which pixels of the mapped cylinder have to be within the given rectangle.
|
| DatacodeDecodeStrategy |
Specifies precision of outline detection.
|
| DatacodeDetectionMethod |
Specifies how code candidates are located.
|
| DatacodeDistortionLevel |
Distortion of the code grid
|
| DataCodeDotSize |
Specifies the size of a dot for dot-printed codes.
|
| DatacodeEdgeTracker |
Decides how strongly edge tracker preserves continuity of an edge.
|
| DatacodeFinderTradeoff |
Decides whether to optimize parameters for weak edges or for jagged ones.
|
| DatacodeGapSize |
Specifies the distance between neighboring modules.
|
| DatacodePerspectiveLevel |
Perspective distortion of the code grid
|
| DatacodePyramidStrategy |
Specifies the step of image downsampling used for finding codes at different
scales.
|
| DataCodeType |
Symbology of a 2D code.
|
| DataMatrixType |
Determines data code type.
|
| DataModeFunction |
Possible methods of calculating the center of a data mode.
|
| DayOfWeek |
Day of week
|
| DebayeringMethod |
Determines what method of decoding a Bayer-encoded image will be used.
|
| DecodeFormat |
Decoding format for datacodes.
|
| DeepLearningLogLevel |
Defines level of messages logged by Deep Learning filters.
|
| DelimiterHandling | |
| DetectedLocationShape |
Shape of drawn crosshairs representing detected locations.
|
| DeviceKind |
Device types capable of executing deep learning models.
|
| DifferentiationMethod |
Methods of profile differentiation.
|
| Dimension |
Selects a dimension to which an operation will be performed.
|
| DirectionInterpretation | |
| DistanceMeasure |
Method to use when measuring distance between two objects like Profiles, Histograms
or Images.
|
| DownsampleFunction |
Downsampling method used when generating an image pyramid.
|
| DownsampleRegionMode |
Decides what method will be used by DownsampleRegion filter.
|
| DPMMode |
DPM settings.
|
| DrawingMode |
Methods of drawing on the image.
|
| EdgeFilter |
Determines which method is used to compute image gradients.
|
| EdgeMaskFilter |
Non-recursive filters for gradient computing.
|
| EdgeMeasure |
How individual edges are scored.
|
| EdgeNoiseLevel |
Information about how much noise the object edges have.
|
| EdgePolarityMode |
Defines how edges with reversed polarity should be treated.
|
| EdgeTransition |
Decides what is considered as an edge in the image.
|
| ElasticMatchingDetectionStrategy |
Specifies precision of candidates detection.
|
| EquidistanceType |
Methods of maintaining equal distance in corner cases.
|
| ErrorType | |
| ExtremumType |
Decides what kind of extremum is returned.
|
| FileAccessMode | |
| FileNameFilter |
Represents the type of the file name filter.
|
| FileSortingOrder |
Criterion to take into account when sorting files.
|
| FileTimeVariant |
Represents a variant of the file's time attribute.
|
| FitType |
Possibilities of solution fitting.
|
| FrequencyDomainOrigin | |
| GaussKernel |
Possible dimensions of gaussian kernel used to smooth image.
|
| GradientAngleRange |
Range of image gradient angles to choose from
|
| GradientMaskOperator |
Describes methods of image gradient computing.
|
| GradientOperator |
Describes which operator use to compute image gradient.
|
| GradientOrientation |
Describes witch of gradient's orientation to compute.
|
| Grid3DFileFormat |
Which file format to use.
|
| HandEyeCalibrationMethod |
Hand Eye Calibration Method Type used for Optimization
|
| HistogramInterpolationMethod |
Possible values of HistogramInterpolationMethod:
|
| HSxColorModel |
Color models used in given operation.
|
| HTTPRequestMethod |
HTTP request method types.
|
| ImageFileFormat |
Available formats.
|
| ImageMomentType |
Possible image moment descriptors.
|
| IntegerBinaryFormat |
Defines a format of integer binary serialization
|
| InterpolationMethod |
Possible pixel interpolation methods:
|
| ISBTConcatenation |
ISBT Concatenation
|
| JoinDirection |
Describes in which direction join should be performed.
|
| JsonDataType |
JSON data type.
|
| JsonFormatLineBreakType |
JSON format line break type.
|
| KernelShape |
Describes structuring element shape.
|
| KMeansClusteringMethod |
Possible methods of KMeans clustering.
|
| LawsFilterSize |
Possible size of Laws texture filter.
|
| LawsFilterType |
Possible types of Laws filter.
|
| LensDistortionModelType |
Possible predefined sets of lens distortion parameters.
|
| LicenseStorage | |
| LinearBinaryPatternType |
Linear Binary Pattern kind.
|
| LineDirection |
Describes possible directions of text merging in MergeCharactersIntoLines.
|
| LineFinderMethod |
How lines are found from points.
|
| LineMEstimator |
Defines linear regression estimator to use.
|
| LinePeakDetectionMethod |
Determines exact line peak position extraction method.
|
| LineSelection |
Describes the selection criteria for edge segments.
|
| LocateTextPretrainedModel |
Type of pretrained LocateText model.
|
| LocateTextPretrainedModelQuantized |
Type of pretrained LocateText model.
|
| LogsLevel |
Defines level of logs messages.
|
| LoopControl | |
| LuminanceMode |
Determines how the luminance of an image gets computed.
|
| MagnitudeMeasure |
Method of estimation of the vectors' magnitude.
|
| MarkerType |
Possible segments' marker shapes to draw. All images created with inMarkerType
equal to 7.0.
|
| MatchingCriterion |
Methods of classifying an object as a member of group.
|
| MatrixOperation | |
| MeanKernel |
Describes shape and size of structuring element used during smoothing.
|
| MeasureObjectMethod |
Possible methods of measuring width of an object.
|
| MEstimator |
Defines how to suppress the influence of values far from most others on the
result.
|
| Metric |
Specifies method of calculating distance between two points.
|
| Metric3D |
Specifies method of calculating distance between two points in 3D.
|
| MetricUnit |
Represents available metric units for drawing dimensions on image.
|
| MidlevelScale |
Which midlevel scale to use.
|
| MIL1DcodeFormat |
Gradable 1D barcodes formats/types/symbologies by Matrox Image Library.
|
| MIL2DcodeFormat |
Gradable 2D barcodes formats/types/symbologies by Matrox Image Library.
|
| MirrorDirection |
Describes possible directions of image mirroring.
|
| MlpPreprocessing |
Sets additional normalization process.
|
| ModbusDataFormat |
Describes possible data formats.
|
| MorphologyKernel |
Describes shape and size of kernel used during morphological operation.
|
| NonMaximaMethod |
Defines the way non-maxima are detected.
|
| NumberSystemBase |
Specifies the base of the number system.
|
| OAuthProvider |
OAuth Provider.
|
| OcrModelType | |
| OcrPretrainedModel |
Type of pretrained OCR model.
|
| OcrPretrainedModelQuantized |
Type of pretrained OCR model.
|
| OneOf_A_R |
Preferred interpretation for ambiguous glyphs resembling 'A' or 'R'.
|
| OneOf_B_8 |
Preferred interpretation for ambiguous glyphs resembling 'B' or '8'.
|
| OneOf_G_6 |
Preferred interpretation for ambiguous glyphs resembling 'G' or '6'.
|
| OneOf_g_9 |
Preferred interpretation for ambiguous glyphs resembling 'g' or '9'.
|
| OneOf_G_C |
Preferred interpretation for ambiguous glyphs resembling 'G' or 'C'.
|
| OneOf_H_N |
Preferred interpretation for ambiguous glyphs resembling 'H' or 'N'.
|
| OneOf_I_1_l_Bar |
Preferred interpretation for ambiguous glyphs resembling 'I', '1', 'l' or '|'.
|
| OneOf_K_X |
Preferred interpretation for ambiguous glyphs resembling 'K' or 'X'.
|
| OneOf_O_0_D_Q_o |
Preferred interpretation for ambiguous glyphs resembling 'O', '0', 'D', 'Q'
or 'o'.
|
| OneOf_S_5_s |
Preferred interpretation for ambiguous glyphs resembling 'S', '5' or 's'.
|
| OneOf_Y_U_V |
Preferred interpretation for ambiguous glyphs resembling 'Y', 'U' or 'V'.
|
| OneOf_Z_2_z |
Preferred interpretation for ambiguous glyphs resembling 'Z', '2' or 'z'.
|
| OpcUaCertificateHandling |
Defines the action taken on the local application certificate for OPC UA client
when the security settings are initialized.
|
| OpcUaNodeIdType |
Represents a type of the identifier in a NodeId of the OPC UA information model.
|
| OpcUaSecurityMode |
Determines the message security mode of OPC UA connection
|
| OverflowControl |
Control handling overflowed tiles.
|
| PathDistanceMode |
Method of distance between path computation.
|
| PathFeature |
Determines which path feature value to compute.
|
| PathFilter |
Determines which paths will be taken into account.
|
| PathJoiningAngleMeasure |
Determines a way to measure the angle between two paths being joined.
|
| PathJoiningMethod |
Determines a way to combine two paths in one.
|
| PathOrientationAlignment |
Determines how to align paths orientation.
|
| PathSegmentationMode |
Describes possible output of segmentation operation.
|
| PeriodPrecisionMethod |
Determines if and how sub-point accuracy is achieved
|
| PlainType | |
| PlanarTransformationType | |
| PlaneType |
One of three types of plane in 3D determined by the coordinate axes.
|
| Point3DFileFormat |
Available formats.
|
| Point3DGridType |
Describes how a point grid is ordered.
|
| PointShape |
Possible points' shapes to draw.
|
| PolarInterpolationMethod |
Possible pixel interpolation methods for polar transform:
|
| Polarity |
Determines which pixel values will be taken under consideration in processing
in edge detection related operations.
|
| PolarSpaceType |
Decides which formula use to transform image. Parameters \(m\) and \(k\) are
set to values which allow to fit source image in output image.
|
| ProcessingDirections | |
| ProductType | |
| ProfileInterpolationMethod |
Possible values of ProfileInterpolationMethod:
|
| ProjectionDirection |
Possible directions of projection operations.
|
| ProjectionMode |
Possible combinations of values in projection operations.
|
| PythonObjectKind | |
| QueueOverflowAction |
Control handling overflow in queues.
|
| ReaderMode | |
| RealBinaryFormat |
Defines format of real value (floating point) binary serialization
|
| RectangleOrientation |
Describes how to adjust rectangle's orientation.
|
| RectangularRoiMask |
Describes what shape the ROI inside rectangle will have.
|
| RegionConnectivity |
Decides how to understand, which pixels are connected.
|
| RegionContourMode |
Decides what kind of paths will be result of RegionContour filter.
|
| RegionFeature |
Determines which region feature value to compute.
|
| RegionMomentType |
Region moments are regions' mathematical features computed as sums over region
pixels, where \(p_x\) and \(p_y\) denotes x and y coordinate of a pixel.
|
| RegionSegmentFittingMethod |
Determines how segments are fitted to a region.
|
| RegionSkeletonMethod |
Available methods for region skeletonization operation.
|
| ResampleSurfaceMode |
Determines which surface scale should be chosen for resampling.
|
| ResizeMethod |
Interpolation method used when image resizing is considered.
|
| ResizeProfileInterpolation |
Methods of interpolation during profile resizing.
|
| ResultInterpretation | |
| RidgeOperator |
Method of the ridge magnitude measuring.
|
| RotationDirection |
Decides about direction of rotation when operation of angle measuring or vector
interpolation are considered.
|
| RotationSizeMode |
Describes image size change when rotating is performed.
|
| SegmentationAlgorithm |
The way in which text should be split int characters.
|
| Selection |
Describes which result will be reported as filter output.
|
| SequenceEnding |
Determines which array ends to consider.
|
| SerialPortFlowControl | |
| SerialPortParity | |
| SerialPortStopBits | |
| ShapeRegionType | |
| ShiftDirection |
Direction that vertices of the path will be moved in.
|
| ShiftType |
Describes ways of object shifting
|
| SimdLevel |
Different simd levels.
|
| SmoothImageMedianKernel |
Describes kernel shape to be used during median image smoothing.
|
| SortingOrder |
Decides whether objects should be sorted in ascendant or descendant order.
|
| SplitDirection |
Describes a direction in which a box or a rectangle can be split.
|
| StepChange | |
| StreamMode |
Describes, how to interpret file stream.
|
| StringBinaryFormat |
Defines format of string binary serialization
|
| StringByteOrder |
Defines byte ordering within 16-bit words of string binary data
|
| StringEncodingFormat |
Defines character encoding used during string binary serialization
|
| SurfaceEdgeTransition |
Decides what is considered a surface edge.
|
| SurfaceMultipointHeight |
Determines what height a surface point created from more than one point will
have.
|
| SurfaceRidgePolarity |
Determines which height values will be taken under consideration in processing
in surface ridge detection related operations.
|
| SurfaceStripePolarity |
Determines which pixel values will be taken under consideration in processing
in surface edge detection related operations.
|
| TensorDataOrdering |
Arrangement of a data elements in a tensor.
|
| TensorDataType |
A type of data stored in a tensor.
|
| TestImageId |
Type of test image.
|
| TheilSenVariant |
Defines a specific method of the Theil-Sen family.
|
| ThresholdDynamicReferenceMethod |
Possible methods of calculating dynamic threshold values. See SmoothImage filter
family.
|
| ThresholdingAlgorithm |
Which algorithm should be used to extract image from the background.
|
| ThresholdSelectionMethod |
Possible methods of selecting of the threshold automatically.
|
| TiffImageCompressionScheme |
Available TIFF compression schemes.
|
| TileSize |
Defines tile size used in segmentation.
|
| TileTranslationMode |
How many translation of a tile should be considered.
|
| TimezoneKind |
Specifies if timezone is UTC or local
|
| TranslateAlignment |
Translate operation coordinate system alignment.
|
| TrimPathMethod |
Chooses a method to trim a path.
|
| TurnAngleDirection |
Decides which turns are important in operation being performed.
|
| TurnAnglePrecision |
Switches between pixel-precise or subpixel-precise operation.
|
| VideoEncoder |
Supported video encoders. Note that those encoders are not shipped with the
software.
|
| View3DColoring | |
| View3DWorldOrientation | |
| VolumeCalculationMethod |
Determines how negative values are handled.
|
| ZBarcodeType |
Detected symbology.
|
| ZCodePolarity |
Specifies whether the code is darker or brighter than the background.
|
| ZMissedCodeInfo |
Information about why a code was missed.
|
