Back to Aurora Vision Studio website

You are here: Start » Filter Reference » Computer Vision » Shape Fitting 3D » FitPathToStripe3D

FitPathToStripe3D


Module: Vision3DStandard

Performs a series of 1D stripe detections in 3D and creates a path from the detected points.

Applications

Tracing of a stripe, whose rough location and shape is known beforehand.
Name Type Range Description
Input value inSurface Surface Surface to fit path to
Input value inFittingField PathFittingField Path fitting field
Input value inFittingFieldAlignment CoordinateSystem2D* Adjusts the fitting field to the position of the inspected object
Input value inScanStep Real* 0.0 - Optional implicit conversion of the input path to an equidistant one
Input value inSamplingStep Real* 0.0 - Desired distance between consecutive sampling points on the scan segments; if Nil, the bigger of surface X and Y scales is chosen
Input value inScanWidth Integer 1 - The width of each scan field (in pixels)
Input value inSurfaceInterpolation InterpolationMethod Interpolation method used for extraction of surface points
Input value inStripeScanParams StripeScanParams3D Parameters controlling the stripe extraction process
Input value inStripeSelection Selection Selection mode of stripes
Input value inLocalBlindness LocalBlindness* Defines conditions in which weaker edges can be detected in the vicinity of stronger edges
Input value inMaxProfileGapWidth Integer* 0 - Maximal number of consecutive not existing profile points
Input value inMaxPathInterpolationLength Integer* 0 - Maximal number of consecutive points not found
Input value inMaxDeviationDelta Real* 0.0 - Maximal difference between deviations of consecutive path points
Input value inMaxIncompleteness Real 0.0 - 0.999 Maximal fraction of stripe points not found
Output value outPath Point3DArray? Fitted path or nothing if the fitting failed
Output value outLeftPath Point3DArray? Fitted left path
Output value outRightPath Point3DArray? Fitted right path
Output value outStripes SurfaceStripe1D?Array Found stripes
Output value outDeviationProfile Profile? Profile of distances between the actual path points and the corresponding reference path points
Output value outAlignedFittingField PathFittingField Fitting field used; in the image coordinate system
Output value outHeightProfiles ProfileArray Extracted surface height profiles
Output value outResponseProfiles ProfileArray Profiles of the edge (derivative) operator response
Output value outPathSegments Segment3DArray? Segments of the fitted path or nothing if the fitting failed
Diagnostic input diagScanSegments Segment2DArray Segments along which the scans were run
Diagnostic input diagSamplingAreas Rectangle2DArray Areas from which the input image is sampled

Hardware Acceleration

This operation supports automatic parallelization for multicore and multiprocessor systems.

Errors

This filter can throw an exception to report error. Read how to deal with errors in Error Handling.

List of possible exceptions:

Error type Description
DomainError Sampling step set to zero in FitPathToStripe3D.

Complexity Level

This filter is available on Basic Complexity Level.

Filter Group

This filter is member of FitPath3D filter group.