You are here: Start » AVL.NET » AVS.FitSegmentToRidges_Direct Method

AVS.FitSegmentToRidges_Direct Method

Namespace:AvlNet
Assembly:AVL.NET.dll

Syntax

public static void FitSegmentToRidges_Direct
(
	AvlNet.Image inImage,
	AvlNet.SegmentFittingField inFittingField,
	AvlNet.CoordinateSystem2D? inFittingFieldAlignment,
	int inScanCount,
	int inScanWidth,
	AvlNet.SamplingParams inSamplingParams,
	AvlNet.RidgeScanParams inRidgeScanParams,
	AvlNet.Selection inRidgeSelection,
	AvlNet.LocalBlindness? inLocalBlindness,
	float inMaxIncompleteness,
	AvlNet.LineMEstimator? inOutlierSuppression,
	out AvlNet.Segment2D? outSegment,
	NullableRef<List<AvlNet.Ridge1D?>> outRidges,
	NullableRef<NullableRef<AvlNet.Profile>> outDeviationProfile,
	NullableValue<AvlNet.SegmentFittingField> outAlignedFittingField,
	NullableRef<List<AvlNet.Point2D>> outInliers,
	NullableRef<SafeList<AvlNet.Profile>> outBrightnessProfiles,
	NullableRef<SafeList<AvlNet.Profile>> outResponseProfiles,
	IList<AvlNet.Segment2D> diagScanSegments,
	IList<AvlNet.Rectangle2D> diagSamplingAreas
)

Parameters

Name Type Range Default Description
inImageAvlNet.ImageImage to fit segment to
inFittingFieldAvlNet.SegmentFittingFieldSegment fitting field
inFittingFieldAlignmentAvlNet.CoordinateSystem2D?Adjusts the fitting field to the position of the inspected object
inScanCountint<3, INF>10The number of points that will be searched to estimate the position of the segment
inScanWidthint<1, INF>5The width of each scan field (in pixels)
inSamplingParamsAvlNet.SamplingParamsParameters controlling the sampling process
inRidgeScanParamsAvlNet.RidgeScanParamsRidgeScanParams ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 1.0f RidgeWidth: 5 RidgeMargin: 2 MinMagnitude: 5.0f RidgePolarity: Dark )Parameters controlling the ridge extraction process
inRidgeSelectionAvlNet.SelectionSelection mode of ridges
inLocalBlindnessAvlNet.LocalBlindness?Defines conditions in which weaker ridges can be detected in the vicinity of stronger ridges
inMaxIncompletenessfloat<0.0f, 0.999f>0.1fMaximal fraction of ridge points not found
inOutlierSuppressionAvlNet.LineMEstimator?Selects a method for ignoring incorrectly detected points
outSegmentAvlNet.Segment2D?Fitted segment or nothing if the fitting fails
outRidgesAvlNet.NullableRef<System.Collections.Generic.List<AvlNet.Ridge1D?>>Found ridges
outDeviationProfileAvlNet.NullableRef<AvlNet.NullableRef<AvlNet.Profile>>Profile of distances between the actual segment points and the corresponding reference segment points
outAlignedFittingFieldAvlNet.NullableValue<AvlNet.SegmentFittingField>Fitting field used; in the image coordinate system
outInliersAvlNet.NullableRef<System.Collections.Generic.List<AvlNet.Point2D>>Points matching the fitting segment
outBrightnessProfilesAvlNet.NullableRef<AvlNet.SafeList<AvlNet.Profile>>Extracted image profiles
outResponseProfilesAvlNet.NullableRef<AvlNet.SafeList<AvlNet.Profile>>Profiles of the ridge operator response
diagScanSegmentsSystem.Collections.Generic.IList<AvlNet.Segment2D>Segments along which the scans were run
diagSamplingAreasSystem.Collections.Generic.IList<AvlNet.Rectangle2D>Areas from which the input image is sampled

Function Overrides

See also