VimbaAcquisitionControlParams

Description

Aggregates image acquisition parameters for use with Vimba filters.

Structure Fields

Type fields and default values (if defined) are described below:

Name	Type	Description
AcquisitionFrameRate	Real*	Controls the maximum acquisition rate (in Hertz) at which the frames are captured
BalanceRatio	VimbaBalanceRatio*	Sets the gains of red and blue channels (the green channel gain is always 1).
BalanceWhiteAuto	VimbaBalanceWhiteAuto*	Sets the automatic white balance mode.
BalanceWhiteAutoAdjustTol	Integer*	Sets the tolerance allowed from the ideal white balance values, within which the auto white balance does not run
BalanceWhiteAutoRate	Integer*	Sets the rate of white balance adjustments
BlackLevel	Real*	Sets the black level (offset) value
ColorTransformationMode	VimbaColorTransformationMode*	Selects the mode for color transformation
ColorTransformationMatrix	VimbaColorTransformationMatrix*	Sets the values of the gain factors or offsets inside the transformation matrix
DefectMaskPixelEnable	Bool*	Enables or disables defective pixel masking
DSPSubregionBottom	Integer*	Defines the bottom edge of the DSP subregion
DSPSubregionLeft	Integer*	Defines the left edge of the DSP subregion
DSPSubregionRight	Integer*	Defines the right edge of the DSP subregion
DSPSubregionTop	Integer*	Defines the top edge of the DSP subregion
EdgeFilter	VimbaEdgeFilter*	Sets the image sharpness or blur
ExposureAuto	VimbaExposureAuto*	Sets the automatic exposure mode when ExposureMode is Timed
ExposureAutoAdjustTol	Integer*	Sets the tolerance in variation from ExposureAutoTarget in which the auto exposure algorithm does not respond
ExposureAutoAlg	VimbaExposureAutoAlg*	Sets the algorithm used to calculate auto exposure
ExposureAutoMax	Integer*	Sets the upper bound to the exposure setting in auto exposure mode
ExposureAutoMin	Integer*	Sets the lower bound to the exposure setting in auto exposure mode
ExposureAutoOutliers	Integer*	Sets the total pixels from top of the distribution that are ignored by the auto exposure algorithm
ExposureAutoRate	Integer*	Sets the rate at which the auto exposure function changes the exposure setting
ExposureAutoTarget	Integer*	Sets the general lightness or darkness of the auto exposure feature
ExposureMode	VimbaExposureMode*	Sets the operation mode of the Exposure
ExposureTime	Real*	Sets the Exposure time (in microseconds) when ExposureMode is Timed
ExposureTimeIncrement	Real*	Sets the increment or resolution of the exposure time in microseconds
ExposureTimePWL1	Real*	Sets the exposure time after ThresholdPWL1 is reached (valid only if ExposureMode = PieceWiseLinearHDR)
ExposureTimePWL2	Real*	Sets the exposure time after ThresholdPWL2 is reached (valid only if ExposureMode = PieceWiseLinearHDR)
FpncEnable	Bool*	Enables or disables fixed pattern noise correction
GainAuto	VimbaGainAuto*	Sets the automatic gain mode
GainAutoAdjustTol	Integer*	Sets the tolerance in variation from GainAutoTarget in which the auto exposure algorithm does not respond
GainAutoMax	Real*	Sets the upper bound to the gain setting in auto gain mode
GainAutoMin	Real*	Sets the lower bound to the gain setting in auto gain mode
GainAutoOutliers	Integer*	Sets the total pixels from top of the distribution that are ignored by the auto gain algorithm
GainAutoRate	Integer*	Sets the rate at which the auto gain function changes
GainAutoTarget	Integer*	Sets the general lightness or darkness of the auto gain feature
GainValue	Real*	Sets the gain (in decibels)
Gamma	Real*	Controls the gamma correction of pixel intensity
Hue	Real*	Alters the color of an image without altering white balance
Saturation	Real*	Alters color intensity
ThresholdPWL1	Real*	Sets the first and highest threshold level (valid only if ExposureMode = PieceWiseLinearHDR)
ThresholdPWL2	Real*	Sets the second and lowest threshold level (valid only if ExposureMode = PieceWiseLinearHDR)
TriggerActivation	VimbaTriggerActivation*	Specifies the activation mode of the trigger
TriggerDelay	Real*	Specifies the delay in microseconds (us) to apply after the trigger reception before activating it
TriggerEnabled	Bool*	Controls if the selected trigger is active
TriggerOverlap	VimbaTriggerOverlap*	Sets the permitted window of trigger activation, relative to the previous frame
TriggerSelector	VimbaTriggerSelector*	Specifies the internal signal or physical input Line to use as the trigger source
TriggerSource	VimbaTriggerSource*	Determines how an image frame is initiated within an acquisition stream