You are here: Start » Filter Reference » Camera Support » Hikvision » Hikvision_ConfigureTrigger

Hikvision_ConfigureTrigger

Module:	ThirdParty

Sets triggering parameters.

Name	Type	Range	Description
inDeviceID	String *		Camera serial number, name or IP address, Auto = first camera
inTriggerEnabled	Bool *		True if using trigger
inTriggerSelector	HikvisionEvent *		Triggering event selection
inTriggerSource	HikvisionTriggerSource *		Trigger source
inTriggerActivation	HikvisionTriggerActivation *		Trigger polarity
inTriggerDelay	Real *	0.0 -	Delay of trigger in microseconds

Remarks

Camera driver software

This filter is intended to cooperate with camera using its vendor Hikvision SDK. To be able to connect to camera it is required to install Hikvision Machine Vision Software with camera dedicated drivers. Currently Adaptive Vision Studio uses Hikvision SDK version 3.2.0 (DLL version 3.2.0.3).

Hikvision SDK can be downloaded from the following website: http://en.hikrobotics.com/service/soft.htm?type=1

Setting bandwidth for GigEVision cameras

Bandwidth of Hikvision GigEVision cameras needs to be configured before use, otherwise packet loss and image artifacts may occur.

Open MVS software from Hikvision and connect to the camera. Open Settings / Options menu and go to Network tab. Bandwidth Control slider will be shown. To preserve new value of bandwidth after disconnecting power from the camera, you will need to save it using User Set Control parameters in Features tab.

Parallel execution

This filter cannot be placed in multiple Workers.

Complexity Level