You are here: Start » AVL.NET » Function Reference » Computer Vision » Shape Fitting » AVL.FitSegmentToStripe_Direct

AVL.FitSegmentToStripe_Direct

Performs a series of 1D stripe detections and finds a segment that best matches the detected points.

Namespace:AvlNet
Assembly:AVL.NET.dll

Syntax

C++
C#
 
public static void FitSegmentToStripe_Direct
(
	AvlNet.Image inImage,
	AvlNet.SegmentFittingField inFittingField,
	AvlNet.CoordinateSystem2D? inFittingFieldAlignment,
	int inScanCount,
	int inScanWidth,
	AvlNet.SamplingParams inSamplingParams,
	AvlNet.StripeScanParams inStripeScanParams,
	AvlNet.Selection inStripeSelection,
	AvlNet.LocalBlindness? inLocalBlindness,
	float inMaxIncompleteness,
	AvlNet.LineMEstimator? inOutlierSuppression,
	out AvlNet.Segment2D? outSegment,
	out AvlNet.Segment2D? outLeftSegment,
	out AvlNet.Segment2D? outRightSegment,
	NullableRef<List<NullableRef<AvlNet.Stripe1D>>> outStripes,
	NullableRef<List<AvlNet.Point2D>> outStripePoints,
	NullableRef<NullableRef<AvlNet.Profile>> outDeviationProfile,
	NullableValue<AvlNet.SegmentFittingField> outAlignedFittingField
)

Parameters

Name Type Range Default Description
inImageAvlNet.ImageImage to fit segment to.
inFittingFieldAvlNet.SegmentFittingFieldSegment fitting field.
inFittingFieldAlignmentAvlNet.CoordinateSystem2D?Adjusts the fitting field to the position of the inspected object. Default value: atl::NIL.
inScanCountint<3, INF>10The number of points that will be searched to estimate the position of the segment. Default value: 10.
inScanWidthint<1, INF>5The width of each scan field (in pixels). Default value: 5.
inSamplingParamsAvlNet.SamplingParamsParameters controlling the sampling process.
inStripeScanParamsAvlNet.StripeScanParamsStripeScanParams ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 0.6f MinMagnitude: 5.0f MaxInnerEdgeMagnitude: Nil StripePolarity: Dark MinStripeWidth: 0.0f MaxStripeWidth: Nil )Parameters controlling the stripe extraction process. Default value: StripeScanParams ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 0.6f MinMagnitude: 5.0f MaxInnerEdgeMagnitude: Nil StripePolarity: Dark MinStripeWidth: 0.0f MaxStripeWidth: Nil ).
inStripeSelectionAvlNet.SelectionSelection mode of stripe.
inLocalBlindnessAvlNet.LocalBlindness?Defines conditions in which weaker edges can be detected in the vicinity of stronger edges. Default value: atl::NIL.
inMaxIncompletenessfloat<0.0f, 0.999f>0.1fMaximal fraction of stripe points not found. Default value: 0.1f.
inOutlierSuppressionAvlNet.LineMEstimator?Selects a method for ignoring incorrectly detected points. Default value: atl::NIL.
outSegmentAvlNet.Segment2D?Fitted segment in the middle of found stripe.
outLeftSegmentAvlNet.Segment2D?Fitted left segment.
outRightSegmentAvlNet.Segment2D?Fitted right segment.
outStripesAvlNet.NullableRef<System.Collections.Generic.List<AvlNet.NullableRef<AvlNet.Stripe1D>>>Found stripes. Can be null to skip this parameter calculation.
outStripePointsAvlNet.NullableRef<System.Collections.Generic.List<AvlNet.Point2D>>Extracted points of middle segment of an image stripe. Can be null to skip this parameter calculation.
outDeviationProfileAvlNet.NullableRef<AvlNet.NullableRef<AvlNet.Profile>>Profile of distances between the actual segment points and the corresponding reference segment points. Can be null to skip this parameter calculation.
outAlignedFittingFieldAvlNet.NullableValue<AvlNet.SegmentFittingField>Fitting field used; in the image coordinate system. Can be null to skip this parameter calculation.

Description

The operation tries to fit a given segment to stripe present in the inImage image. Internally, it performs a series of scans with the ScanSingleStripe_Direct filter along inScanCount specific scan segments which length is always equal to the inFittingField width and cannot be less than 4. The found points are then used to determine the actual position of the segment in the image. Only inMaxIncompleteness fraction of these scans may fail. If the fitting according to the given parameters is not possible, outSegment is set to Nil.

Examples

Fitting a segment to the dark stripe of a nail
(inStripeScanParams.Polarity = Dark).

Remarks

Read more about Local Coordinate Systems in Machine Vision Guide: Local Coordinate Systems.

This filter is a part of the Shape Fitting toolset. To read more about this technique, one can refer to the Shape Fitting chapter of our Machine Vision Guide

Hardware Acceleration

This operation supports automatic parallelization for multicore and multiprocessor systems.

Hardware acceleration settings may be manipulated with Settings class.

Function Overrides

See also