You are here: Start » Filter Reference » Shape Fitting 3D » FitSegmentToStripe3D

FitSegmentToStripe3D

Performs a series of 1D edge detections in 3D and finds a segment that best matches the detected points.

	Name	Type	Range	Description
	inSurface	Surface		Surface to fit segment to
	inFittingField	SegmentFittingField		Segment fitting field
	inFittingFieldAlignment	CoordinateSystem2D*		Adjusts the fitting field to the position of the inspected object
	inScanCount	Integer	3 -	The number of points that will be searched to estimate the position of the segment
	inSamplingStep	Real*		Desired distance between consecutive sampling points on the scan segments; if Nil, the bigger of surface X and Y scales is chosen
	inScanWidth	Integer	1 -	The width of each scan field (in pixels)
	inSurfaceInterpolation	InterpolationMethod		Interpolation method used for extraction of surface points
	inStripeScanParams	StripeScanParams3D		Parameters controlling the stripe extraction process
	inStripeSelection	Selection		Selection mode of stripe
	inLocalBlindness	LocalBlindness*		Defines conditions in which weaker edges can be detected in the vicinity of stronger edges
	inMaxProfileGapWidth	Integer*	0 -	Maximal number of consecutive not existing profile points
	inMaxIncompleteness	Real	0.0 - 0.999	Maximal fraction of stripe points not found
	inOutlierSuppression	MEstimator*		Selects a method for ignoring incorrectly detected points
	outSegment	Segment3D?		Fitted segment or nothing if the fitting fails
	outLeftSegment	Segment3D?		Fitted left segment
	outRightSegment	Segment3D?		Fitted right segment
	outStripes	SurfaceStripe1D?Array		Found stripes
	outStripePoints	Point3DArray		Extracted points of middle segment of a surface stripe
	outDeviationProfile	Profile?		Profile of distances between the actual segment points and the corresponding reference segment points
	outAlignedFittingField	SegmentFittingField		Fitting field used; in the image coordinate system
	diagScanSegments	Segment2DArray		Segments along which the scans were run
	diagSamplingAreas	Rectangle2DArray		Areas from which the input image is sampled
	diagHeightProfiles	ProfileArray		Extracted surface height profiles
	diagResponseProfiles	ProfileArray		Profiles of the edge (derivative) operator response

Applications

Hardware Acceleration

Complexity Level

Filter Group