You are here: Start » Filter Reference » Shape Fitting 3D » FitPathToStripe3D

FitPathToStripe3D

Performs a series of 1D stripe detections in 3D and creates a path from the detected points.

	Name	Type	Range	Description
	inSurface	Surface		Surface to fit path to
	inFittingField	PathFittingField		Path fitting field
	inFittingFieldAlignment	CoordinateSystem2D*		Adjusts the fitting field to the position of the inspected object
	inScanStep	Real*	0.0 -	Optional implicit conversion of the input path to an equidistant one
	inSamplingStep	Real*		Desired distance between consecutive sampling points on the scan segments; if Nil, the bigger of surface X and Y scales is chosen
	inScanWidth	Integer	1 -	The width of each scan field (in pixels)
	inSurfaceInterpolation	InterpolationMethod		Interpolation method used for extraction of surface points
	inStripeScanParams	StripeScanParams3D		Parameters controlling the stripe extraction process
	inStripeSelection	Selection		Selection mode of stripes
	inLocalBlindness	LocalBlindness*		Defines conditions in which weaker edges can be detected in the vicinity of stronger edges
	inMaxProfileGapWidth	Integer*	0 -	Maximal number of consecutive not existing profile points
	inMaxPathInterpolationLength	Integer*	0 -	Maximal number of consecutive points not found
	inMaxDeviationDelta	Real*	0.0 -	Maximal difference between deviations of consecutive path points
	inMaxIncompleteness	Real	0.0 - 0.999	Maximal fraction of stripe points not found
	outPath	Point3DArray?		Fitted path or nothing if the fitting failed
	outLeftPath	Point3DArray?		Fitted left path
	outRightPath	Point3DArray?		Fitted right path
	outStripes	SurfaceStripe1D?Array		Found stripes
	outDeviationProfile	Profile?		Profile of distances between the actual path points and the corresponding reference path points
	outAlignedFittingField	PathFittingField		Fitting field used; in the image coordinate system
	diagScanSegments	Segment2DArray		Segments along which the scans were run
	diagSamplingAreas	Rectangle2DArray		Areas from which the input image is sampled
	diagHeightProfiles	ProfileArray		Extracted surface height profiles
	diagResponseProfiles	ProfileArray		Profiles of the edge (derivative) operator response

Applications

Hardware Acceleration

Complexity Level

Filter Group