Back to Adaptive Vision Studio website

You are here: Start » Filter Reference » Photoneo » Photoneo_GrabDepthMap_WithTimeout

Photoneo_GrabDepthMap_WithTimeout


Captures DepthMap structure using Photoneo.

Name Type Description
inDeviceID String* Device identification string
inTimeout Integer* Timeout [ms]
outImage Image? Output image

Remarks

PhoXi Control

PhoXi Control process needs to run for the filters to work.

Camera Setup

It is advisable to use Photoneo_StartAcquisition filter and setup inCaptureSettings with proper values. Some values might not be set to values the user expects and acquisition will fail or wait infinitely, when wrong trigger source or output type is selected.

Camera identification

When there is only one Photoneo camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.

inDeviceID can be used to pick one camera connected to the computer.

Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Photoneo PhoXi Control software.

Photoneo PhoXi Control can be downloaded from the following website: https://www.photoneo.com/3d-scanning-software/

Supported PhoXi Control version for Adaptive Vision Studio usage is 1.2.14.

Multithreaded environment

This function is not guaranteed to be thread-safe. When used in multithreaded environment, it has to be manually synchronized.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Adaptive Vision Studio Professional version.

Filter Group

This filter is member of Photoneo_GrabDepthMap filter group.

See Also