Back to Adaptive Vision Studio website

You are here: Start » Filter Reference » Advantech » DAQNavi_InitInterrupts

DAQNavi_InitInterrupts


Initializes interrupts.

Name Type Description
inDeviceID String* Description or index of device
inChannels IntegerArray Interrupted channel numbers
inTriggerMode DAQNaviTrigger Trigger mode

Remarks

Board driver software

This filter is intended to cooperate with digital I/O cards using its vendor SDK. To be able to connect to a card it is required to install DAQNavi SDK software. Currently Adaptive Vision Studio requires DAQNavi SDK version 3.2.

DAQNavi SDK can be downloaded from the following website: http://www.advantech.com.

Device identification

When there is only one device connected to computer, inDeviceID field can be set to Auto. In this situation first available device will be found and connected.

inDeviceID can be used to pick one of multiple devices connected to computer. Set this field to Device Description (for example "DemoDevice, BID#000"), or to Device Number(for example "0"). Both parameters should be available in Advantech Navigator.

Multithreaded environment

This function is not guaranteed to be thread-safe. When used in multithreaded environment, it has to be manually synchronized.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Adaptive Vision Studio Professional version.

See Also