You are here: Start » Filter Reference » National Instruments » DAQmx_ConfigAnalogEdgeTrigger

DAQmx_ConfigAnalogEdgeTrigger

Returns values from a digital channel.

Name	Type	Description
inDeviceID	String *	Device alias, product name or a serial number
inTaskID	DAQmxTaskID	ID of task where triggering is used
inTriggerSource	String	Source of trigger
inTriggerSlope	DAQmxActiveEdge	Slope of trigger
inTriggerLevel	Real	Threshold of trigger
outTaskID	DAQmxTaskID ?	ID of a created task

Remarks

Device driver software

This filter is intended to cooperate with digital I/O cards using its vendor driver software. To be able to connect to a card it is required to install NI-DAQmx driver software. Currently Adaptive Vision Studio requires NI-DAQmx version 9.5.

NI-DAQmx driver software can be downloaded from the following website: http://www.ni.com/dataacquisition/nidaqmx.htm.

Device identification

When there is only one device connected to computer, inDeviceID field can be set to Auto. In this situation first available device will be found and connected.

inDeviceID can be used to pick one of multiple devices connected to computer. Set this field to Device alias (for example "Dev1"), product name or serial number. This parameters should be available in Measurement & Automation Explorer.

User manual

For more informations about using this filters please follow the link: Working with National Instruments devices.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Adaptive Vision Studio Professional version.