VimbaAcquisitionControlParams

Description

Aggregates image acquisition parameters for use with Vimba filters.

Structure fields and default values (if defined) are described below:

Name	Type	Description
AcquisitionFrameRate	FloatType	Controls the maximum acquisition rate (in Hertz) at which the frames are captured
BalanceRatio	VimbaBalanceRatio	Sets the gains of red and blue channels (the green channel gain is always 1).
BalanceWhiteAuto	VimbaBalanceWhiteAuto	Sets the automatic white balance mode.
BalanceWhiteAutoAdjustTol	IntType	Sets the tolerance allowed from the ideal white balance values, within which the auto white balance does not run
BalanceWhiteAutoRate	IntType	Sets the rate of white balance adjustments
BlackLevel	FloatType	Sets the black level (offset) value
ColorTransformationMode	VimbaColorTransformationMode	Selects the mode for color transformation
ColorTransformationMatrix	VimbaColorTransformationMatrix	Sets the values of the gain factors or offsets inside the transformation matrix
DefectMaskPixelEnable	BoolType	Enables or disables defective pixel masking
DSPSubregionBottom	IntType	Defines the bottom edge of the DSP subregion
DSPSubregionLeft	IntType	Defines the left edge of the DSP subregion
DSPSubregionRight	IntType	Defines the right edge of the DSP subregion
DSPSubregionTop	IntType	Defines the top edge of the DSP subregion
EdgeFilter	VimbaEdgeFilter	Sets the image sharpness or blur
ExposureAuto	VimbaExposureAuto	Sets the automatic exposure mode when ExposureMode is Timed
ExposureAutoAdjustTol	IntType	Sets the tolerance in variation from ExposureAutoTarget in which the auto exposure algorithm does not respond
ExposureAutoAlg	VimbaExposureAutoAlg	Sets the algorithm used to calculate auto exposure
ExposureAutoMax	IntType	Sets the upper bound to the exposure setting in auto exposure mode
ExposureAutoMin	IntType	Sets the lower bound to the exposure setting in auto exposure mode
ExposureAutoOutliers	IntType	Sets the total pixels from top of the distribution that are ignored by the auto exposure algorithm
ExposureAutoRate	IntType	Sets the rate at which the auto exposure function changes the exposure setting
ExposureAutoTarget	IntType	Sets the general lightness or darkness of the auto exposure feature
ExposureMode	VimbaExposureMode	Sets the operation mode of the Exposure
ExposureTime	FloatType	Sets the Exposure time (in microseconds) when ExposureMode is Timed
ExposureTimeIncrement	FloatType	Sets the increment or resolution of the exposure time in microseconds
ExposureTimePWL1	FloatType	Sets the exposure time after ThresholdPWL1 is reached (valid only if ExposureMode = PieceWiseLinearHDR)
ExposureTimePWL2	FloatType	Sets the exposure time after ThresholdPWL2 is reached (valid only if ExposureMode = PieceWiseLinearHDR)
FpncEnable	BoolType	Enables or disables fixed pattern noise correction
GainAuto	VimbaGainAuto	Sets the automatic gain mode
GainAutoAdjustTol	IntType	Sets the tolerance in variation from GainAutoTarget in which the auto exposure algorithm does not respond
GainAutoMax	FloatType	Sets the upper bound to the gain setting in auto gain mode
GainAutoMin	FloatType	Sets the lower bound to the gain setting in auto gain mode
GainAutoOutliers	IntType	Sets the total pixels from top of the distribution that are ignored by the auto gain algorithm
GainAutoRate	IntType	Sets the rate at which the auto gain function changes
GainAutoTarget	IntType	Sets the general lightness or darkness of the auto gain feature
GainValue	FloatType	Sets the gain (in decibels)
Gamma	FloatType	Controls the gamma correction of pixel intensity
Hue	FloatType	Alters the color of an image without altering white balance
Saturation	FloatType	Alters color intensity
ThresholdPWL1	FloatType	Sets the first and highest threshold level (valid only if ExposureMode = PieceWiseLinearHDR)
ThresholdPWL2	FloatType	Sets the second and lowest threshold level (valid only if ExposureMode = PieceWiseLinearHDR)
TriggerActivation	VimbaTriggerActivation	Specifies the activation mode of the trigger
TriggerDelay	FloatType	Specifies the delay in microseconds (us) to apply after the trigger reception before activating it
TriggerEnabled	BoolType	Controls if the selected trigger is active
TriggerOverlap	VimbaTriggerOverlap	Sets the permitted window of trigger activation, relative to the previous frame
TriggerSelector	VimbaTriggerSelector	Specifies the internal signal or physical input Line to use as the trigger source
TriggerSource	VimbaTriggerSource	Determines how an image frame is initiated within an acquisition stream